(Guide) How install Renault CAN Clip V162 on Windows XP?

This is a How-to guide for newest Renault CAN Clip V162 software installation. Operating system is Windows XP. Below are detailed steps for you!

Step1. Unzip and open Renault CAN Clip V162 software folder. Copy “Activation (Patch 3)” folder to desktop.

Open “Activation (Patch 3)” folder, right click the “Crack Renault Clip” registration entries then click “Merge”→ “Yes” → “OK”.

Step2. Open the “Setup”.exe. Now the installation process starts. Click “First Installation” icon.

Choose “I accept…” option and click “Next”.

Choose “Other Countries” and click “Next”.

Choose “English” and click “Next”.

Choose “Renault” click “Next” then “Next”.

Step3. Now you can see a “Windows Resource Kit Tools Setup Wizard”.

Click “Next”→ choose “I agree…” option→ Click “Next” → Click “Next” → Click “Install Now”.

Wait a while for completing then click “Finish”

Restart your computer. After that click “Finish” and Renault CAN Clip V162 “First Installation” complete!

Step4. Right click the “CLIP” icon on desktop, click “Properties” then “Find Target”.

You will open a Application folder (local disk C:/CLIP_X91/Lib/ Application) Cut the “RSRWin” application to desktop.

Go to Renault CAN Clip V162 software folder → “Activation (Patch 3)” folder.

Copy the another “RSRWin” application to Application folder (local disk C:/ CLIP_X91/ Lib/ Application)

Step5. Open the “RSRWin” application in Application folder. Click “I understand and accept the licence…” then “Register me now”.

It will ask “Are you part of Renault Network?” Click “No”.

Now go to Renault CAN Clip V162 software folder, you can find a picture (Renault CLIP Registration Step-4). According to this picture enter the required “unlocking code” and click “Confirm”.

It will show “Registration successful”. Click “OK”.

Step6. Cut the “RSRWin” application on desktop to replace the “RSRWin” application in Application folder (local disk C:/CLIP_X91/Lib/ Application).

Now you can see a “Found New Hardware Wizard”, click “Next” then “Finish”.

Install device driver successfully. You can check “My Computer”→ choose “Manage” → “Device Manager” → “Bosch automotive service solution device” → “18-alliance vehicle communication interface”.

Step7. Right click desktop to open “Display Properties”. Go to “Screen Saver” → “Power and setup”. Change Settings: Power scheme: Always on→ Turn off monitor: Never, Never→ Turn off hard disk: Never, Never→ System standby: Never, Never

After that click “Apply” then “OK”.

Now you can use Renault CAN Clip Diagnostic Interface! Click “CLIP” icon to run Renault CAN Clip V162 software. There will be a security alert just click “Unlock”.

eobdtool.co.uk