How KTAG EU clone read Bosch EDC17C10 Tricore PSA Peugeot 308?

This is a guide for using KTAG K-TAG ECU Programming Tool Master to read Bosch EDC17C10 PSA Peugeot 308 on bench. Below are operation steps for you!

v213-ktag-ecu-programming-tool-1

Step1. Take out the EDC17C10 ECU unit and open it. (Remember to heat the ECU edge before open that will protect the circuit)

ktag-ecu-programming-tool-read-edc17c10-psa-peugeot-ecu-2

ktag-ecu-programming-tool-read-edc17c10-psa-peugeot-ecu-3

Step2. Connect the cable 14P600KT02 to the ECU connector according to the pin out diagram below:

Pin 2, 19—red color—+12V

Pin 4—black color—Ground

Pin 40—white color—CAN-H

Pin 52—green color—CAN-L

Soldered wire—gray with alligator clip—Boot

ktag-ecu-programming-tool-read-edc17c10-psa-peugeot-ecu-4

ktag-ecu-programming-tool-read-edc17c10-psa-peugeot-ecu-5

ktag-ecu-programming-tool-read-edc17c10-psa-peugeot-ecu-6

Step3. Before reading ECU, remember to make a backup copy. Open KTAG 2.13 Master clone software. Choose “Peugeot”—“308”—“Bosch EDC17C10 Tricore” as follows:

ktag-ecu-programming-tool-read-edc17c10-psa-peugeot-ecu-7

Select the plug-in P219.

ktag-ecu-programming-tool-read-edc17c10-psa-peugeot-ecu-8

Step4. Click “Read” to start read ECU.

ktag-ecu-programming-tool-read-edc17c10-psa-peugeot-ecu-9

Wait a while and ECU reading complete!

ktag-ecu-programming-tool-read-edc17c10-psa-peugeot-ecu-10

Save the bin file at proper location. Things done! KTAG K-TAG read Bosch EDC17C10 PSA Peugeot 308 Tricore successfully!

ktag-ecu-programming-tool-read-edc17c10-psa-peugeot-ecu-11

eobdtool.co.uk